Stainless Steel Scupper Valve Barbed – 1-1/2″ Hose Size
Polish your image with these beautiful, durable stainless steel fittings. Why specify plastic parts when these fittings will last the life of the boat?
Rugged Stainless Construction:
- Cast from certified Enhanced 316 Stainless Steel alloy for strength and lifetime corrosion-resistance
- All visible areas are polished to a mirror finish, then passivate each part for additional protection
- Thick steel sidewalls withstand continual stress and hose flexing
Faster, Simpler Installation:
- Each Scupper Valve is available with a new silicone gasket
- A channel under the flange holds a bead of sealant, making it easier to apply a trouble-free seal
- All models have wrench flats or an end notch to hold as a gripping surface; one installer can tighten all connections from inside the hull
- The barbed tail ends provide plenty of room to hold multiple clamps
Stainless Steel Scupper Valves, Barbed:
- The Scupper Flap is tough neoprene rubber with a molded V that fits into the grooved body to reduce backwash
- Fasteners are concealed and corrosion-proof
Specifications:
- Hose size: (inch) 1-1/2″ inner diameter
- Thread Diameter: (inch) 1-7/8″
- Flange O.D. (outside diameter): (inch) 3″
- Thread Length: (inch) 3-1/2″
- Barb Length: (inch) 1-1/2″
- Total Length: (inch) 5-1/2″
- Install Hole Saw Size: (inch) 2″
- Thread NPSM: (inch) 1-1/2″
- Max Hull Thickness: (inch) 3″
*Stainless Steel Thru-Hull Connectors are designed for installation above the water line only
| Quick Guid | https://productimageserver.com/literature/quickGuide/98094QG.pdf |
| Installation Guide | https://productimageserver.com/literature/installations/98094IN.pdf |